Post by transmin01 on CANbus issue ^{CODESYS Forge talk (Post)}
Hi, I have been trying to get a CANbus device working with Codesys 3.5SP19 patch1 via a Beckhoff EL6751 gateway without success. I have the CANOpen_Manager and CANopen device configured but this will not run. Is there any code required to kickstart the CANbus comms into action? Regards Trevor
Last updated: 2023-09-13

Post by eschwellinger on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
ok now it is clear - this is a single core Pi Zero W. For this device there is no edge device available. But just for working with CODESYS it is not really needed and yes plc runs only for 2h unlicensed.
Last updated: 2023-09-13

Post by eschwellinger on RPi, Codesys , RS232 ^{CODESYS Forge talk (Post)}
/dev/spidev0.0 and /dev/spidev0.1 are SPI interfaces - so you could not map them to serial ports that way. The serial port: [SysCom] Linux.DeviceFile.1=/dev/serial0 for Com1
Last updated: 2023-10-07

Post by oazrad on Async Manager ^{CODESYS Forge talk (Post)}
anyone found any sample code for this library? I'm trying to work with AsyncManager but the documentation is not helping? Surly, codesys when they coded this library they had a sample project to test and simulate the functionality for this library. can you share it please ?
Last updated: 2023-11-15

Post by gerdkoch on OPCUA Datasource, can not login... ^{CODESYS Forge talk (Post)}
Hi, please share your codesys ide version and the version of the communication addon. Do you use encrypted communication? Did the browsing in the ide work? Did you create the certificate for the client in the security screen? BR
Last updated: 2023-11-27

Post by nickelwater on Fix compiler version in SP18+ ^{CODESYS Forge talk (Post)}
Is is possible to use the compiler "Fix Version" in SP18+? I have noticed that in SP17 and below, the option is available in the compiler options under project settings, but in versions 18+ it is unselectable. The help topic does not provide any information.
Last updated: 2024-07-21

Post by taqamert on Codesys and CANopen manager sensors with same NodeID ^{CODESYS Forge talk (Post)}
Maximilian-K, The links you added are not working right now, but what I need is exactly what you described. Where can I access this information?
Last updated: 2024-07-22

Post by eschwellinger on Codesys Virtual Control - startup problem ^{CODESYS Forge talk (Post)}
I think you have already up and running an Edge on the host ( not in the container) please uninstall that edge, then it should work.
Last updated: 2024-08-13

Post by opineiro on Stack overflow with really simple function ^{CODESYS Forge talk (Post)}
Hi and thanks for your reply. Could you explain a little bit more what you mean? I think I'm not following you
Last updated: 2024-09-19

Post by karel-bas on Loosing connection to emulation running on Linux ^{CODESYS Forge talk (Post)}
Ok. I ran the vm twice until it failed and from log it seems like my OPC UA fails becouse I am not able to get HTTPs certificate ? I dont really see any other reason.
Last updated: 2024-09-20

Post by fmbrew-rob on Licensing info not available. ^{CODESYS Forge talk (Post)}
Was there ever any resolution to this? I am using Virtual Control SL on a ProxMox setup, and I can't get the license installed. I get the same errors reported above.
Last updated: 2024-09-21

Post by i-campbell on What is this ST syntax? ^{CODESYS Forge talk (Post)}
https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_st_comment.html it is a comment. I guess it used to be NOT _somevariable and someone want it to always be true.
Last updated: 2024-10-12

Post by jepl-1012 on configuration error for SM_Drive_GenericDSP402 ^{CODESYS Forge talk (Post)}
Hi All, I Am using Delta AX8 Controller And IndrDrive HCS01 With Ethercat COE (Cia402 Profile) .Communication has done properly but while i made MC_Power block on its not get enable. what is the issue can any one help me
Last updated: 2024-10-21

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
thank you, i tried your library and device description but i don't get analog values. Do i something wrong? i also got an library error at the I2C_BASE functionblock the calcCycleTime gave an variable size error, so i added thet conversion from ULINT_TO_UDINT.
Last updated: 2024-11-07

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
This is the operating system and has nothing to do with the runtime. Unless you use 64bit commands. You can see for yourself that you have errors with 64bit compilers
Last updated: 2024-11-09

Post by hfelek on More information on Device address [0058.A0DE] ^{CODESYS Forge talk (Post)}
Hi, Isn't there really a logic to get device address regarding router and IP setups? I'm trying be sure on whether I connect to the right device or not without 'wink' capability on the device.
Last updated: 2024-11-21

Post by zatalian on Beckhoff EL7037 softmotion ^{CODESYS Forge talk (Post)}
The SM3_Drive_ETC_Beckhoff_EL70xx library has descriptors for the EL7031, EL7041 and EL7047 but not the EL7037? Is there another library that has the one I need?
Last updated: 2024-11-26

Post by gseidel on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Hi Imdat, thanks for your effort! We could reproduce the error and will fix it in the next release (4.18.0.0). Best regards, Georg
Last updated: 2024-12-19

Post by jeroenaero on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
For what it is worth taking into account on version 4.18: Softmotion 4.17 doesn't work with the SMC_TRAFO_Scara2. Very small numbers come out of dA and dB. Going back to version 4.16 solves the issues.
Last updated: 2025-01-07

Post by eschwellinger on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
should work, could you please check on the target: top if the the gateway is running -> you should see codesysedge.bin and cat /var/opt/codesysedge/codesysedge.log
Last updated: 2025-01-07

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Sort by relevance or date