Post by doli on Table icon ^{CODESYS Forge talk (Post)}
Hello. I have a simple table in codesys. My first column is icon and on every row I want to have an icon. How can I add it? Thank you!
Last updated: 2024-03-19

Post by timvh on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
You should only open de COM port once and then leave it open. This hCom should not keep on incrementing. (off course when you are done communicating, you need to close the COM port)
Last updated: 2024-03-22

Post by florian on Error while using Codesys SP19 Patch 4 on Windows 11 ^{CODESYS Forge talk (Post)}
Hi, you should have 'CODESYS Installer,' there you can manage your packages and installations. The version number looks like a softmotion package, try to install it. Or repair your whole installation with the CODESYS Installer.
Last updated: 2024-03-26

Post by schnepper on Error building Extension SDK Linux code ^{CODESYS Forge talk (Post)}
Solved: I started from a fresh project and everything worked. I had a Function Block in the project at one point and deleted it. I think Codesys doesn't fully clean up on deletes.
Last updated: 2024-04-02

Post by vincentger on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Any resolution on this? I have currently 75 channels in my project that i brought up from SP18, which means i am 65 Channels above the new limitation?
Last updated: 2024-04-09

Post by flavinhofh on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
ah ok, I will keep trying, I already removed all security from the Server side. I'm new on codesys and I don't know yet how to implement the certificates, but I will find out and also try. thanks for your reply.
Last updated: 2024-04-11

Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hello, I've added some additional log output. Maybe this helps in figuring out the root cause. I've turned logging and verbose mode on for the CodeMeterLin application and I get the error, that some entry is not found.
Last updated: 2024-04-11

Post by marcolim on Slow modbus digital input response ^{CODESYS Forge talk (Post)}
Hi francoinf, I've the similar problem and similar configuration. I did with an Arduino Board loaded by a ModbusRTUServer application on it. What I've notice is the slowly acquisition when release the digital signal (e.g. pin2) when it gets off. Anyone have suggestion?! Thanks
Last updated: 2024-04-13

Post by damian177 on Raspbery Pi and Calendar ^{CODESYS Forge talk (Post)}
Hi, In my visualisation I have a "Calendar" control. I would like save day and month which will be clicket by operator on this control . forexample save in string array. How do this ?
Last updated: 2024-04-23

Post by ekristoffe on 3.5.19.0 IDE forced "hide namespaces" on 3.5.16.40 project ^{CODESYS Forge talk (Post)}
Hello, I have the same problem, I used to enforce the usage of the namespace (which was really helpful). and now I can't even find the option (CS 3.5.19.20). Where in the option this setting used to be ? Thanks
Last updated: 2024-04-25

Post by damian177 on Visualization - table element ^{CODESYS Forge talk (Post)}
Hi, In my application I use table elemnt with filled by STRING ARRAY. I would like to implement the following functionality : When I click on second row, that this row will be cleared. Anyone can help me?
Last updated: 2024-04-25

Post by damian177 on RevPi piBridgeRight not found in project. ^{CODESYS Forge talk (Post)}
Hi, Like in tpoic I hahe a problem with running DIO on RevPi Core SE working with Codesys. Look in attachments. Any idea how solve the problem ?
Last updated: 2024-04-27

Post by davelewis104 on J1939 SA ^{CODESYS Forge talk (Post)}
I am curious if there is a function block or function that will allow me to monitor the J1939 CANBus and pull out all of the SAs that are on a particular bus, without having to have them loaded in the J1939 manager?
Last updated: 2024-04-30

Post by bryandimino on OPC Da Server Code Meter Issues after Enabling License ^{CODESYS Forge talk (Post)}
Additionally the license is loaded on the soft storage for my device but it shows up as invalid. I just activated it today.
Last updated: 2024-05-02

Post by vkira on Radio module on wago 750-8217 ^{CODESYS Forge talk (Post)}
Hello. Tell me how to connect to the internal radio module PLC 750-8217. I use the gsm sms_01 library. I don't understand how to connect. via com port? what's the address?
Last updated: 2024-05-06

Post by guilhermeleao on How to communicate 2 pcs that are using CODESYS ^{CODESYS Forge talk (Post)}
I need to connect 2 computers on the same network that are running codesys, so that they can receive and change variable values from each other. This connection must preferably be made using Modbus.
Last updated: 2024-05-06

Post by tvm on Timer On Vijeo ^{CODESYS Forge talk (Post)}
Vijeo doesn't support TIME variables, so the easiest thing to do is convert to a STRING in your program, and use that variable. You could use TimeAsString:= TIME_TO_STRING(TimeVar) to get a string that looks like this: T#5h10m45s200ms
Last updated: 2024-05-07

Post by dalfaro21 on Softmotion not working with simulation mode ^{CODESYS Forge talk (Post)}
I have a KEB combivis studio software running codesys and I want to make some moves but softmotion is not working on my laptop I hope you can help me!
Last updated: 2024-05-12

Post by eschwellinger on Ethercat bus on Beckhoff CX with Codesys for Linux ^{CODESYS Forge talk (Post)}
yes I think you need to build the kernel drivers for the CCAT driver for the backplane ETC networkcard https://github.com/Beckhoff/CCAT/
Last updated: 2024-05-13

Post by kevinm on Data source and safety PLC ^{CODESYS Forge talk (Post)}
I am having the same trouble. However, if I change the Login Configuration settings to 'Type: Login using the credentials determined at runtime' then the Connection information continues as 'Connection state: Connecting' and 'Error information: OK'. There is no User Management on the source PLC.
Last updated: 2024-05-16

Post by hanoues on Error 550 delete opertion failed ^{CODESYS Forge talk (Post)}
hello, Can anyone help me with my FTP problem on Windows 10? When I try to remove a folder, I can't, and it shows the error message 550.
Last updated: 2024-05-21

Post by arrotek on Codesys HMI Redundancy ^{CODESYS Forge talk (Post)}
Is there a way to run Codesys HMI on two different PC's and have the web visu clients fail over to the HMI instance that is wokring or running?
Last updated: 2024-05-30

Post by nano on Is it possible to profile builds? ^{CODESYS Forge talk (Post)}
pls check whats gookg on with antimalware-service-executable during the build most of my problem are directly connected to that "great" microsoft feature
Last updated: 2024-06-06

Post by fajean on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
https://us.store.codesys.com/codesys-control-for-raspberry-pi-sl.html Quoted from the "additional requirements" section : The operating system Raspberry Pi OS (32-bit)
Last updated: 2024-06-14

Post by mariacugnier on Bug Device login ^{CODESYS Forge talk (Post)}
I'm having the same issue.I think it may be something related to the device adress that changes depending on the network i'm using, but now i don't have access to the one i used while setting my user. Did you find any solution for this?
Last updated: 2024-06-20

Sort by relevance or date