Post by gatto on EXCEPTION [watchdog] how to find position cause ^{CODESYS Forge talk (Post)}
hi. My plc is weidmuller UC20-WL200-AC, IDE CODESYS 3.5.20.40, see picture for task settings. sometime i've got the plc stop. Reading the log, I find: EXCEPTIONPOSITION : IP=0x(nil) (no IECcontext could be retrieved) component CmpIecTask EXCEPTION [Watchdog] occurred: App=[Application], Task=[TASK_O_MAIN] component CmpIecTask How to find the position of problem?
Last updated: 2026-02-06

Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Thread)}
Codesys Network driver install for Codesys Control RTE x64
Last updated: 2026-02-06

Error in licence activation ^{CODESYS Forge talk (Thread)}
Error in licence activation
Last updated: 2026-02-06

Creating Boot Application not working ^{CODESYS Forge talk (Thread)}
Creating Boot Application not working
Last updated: 2026-02-06

Post by hetongapp on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Do you fixed the issues about container serial number different?
Last updated: 2026-02-07

The selected container ... does not fit your ticket ^{CODESYS Forge talk (Thread)}
The selected container ... does not fit your ticket
Last updated: 2026-02-07

Post by timvh on EXCEPTION [watchdog] how to find position cause ^{CODESYS Forge talk (Post)}
Monitor what your current cycle time is (in the Task Configuration when you are online). If this is sometimes close to 200ms, then change your code (e.g. limit the loops, or prevent copying a lot of data between objects). Or just set the Watchdog time (or sensitivity) higher if you don't care that it sometimes takes longer than 200ms. If you want to find out which objects in your application consume the most time, then buy a PDE (Professional Developer Edition) license. With this you get a license for the Profiler. This can help you a lot to find the root cause, because it will create a nice overview of all objects, their calls and the time (percentage) it takes to execute it.
Last updated: 2026-02-09

EXCEPTION [watchdog] how to find position cause ^{CODESYS Forge talk (Thread)}
EXCEPTION [watchdog] how to find position cause
Last updated: 2026-02-09

Post by maxcoulsn on ERROR: Calling the program "AlarmStorage_Prg" is not allowed from multiple tasks ^{CODESYS Forge talk (Post)}
Did you figure out this solution? Im on SP19 Patch 7 Experiencing the same issue.
Last updated: 2026-02-09

Codesys EtherCAT Driver (CmpEt1000MPD) can't set MAC address ^{CODESYS Forge talk (Thread)}
Codesys EtherCAT Driver (CmpEt1000MPD) can't set MAC address
Last updated: 2026-02-09

Post by kporter on Codesys EtherCAT Driver (CmpEt1000MPD) can't set MAC address ^{CODESYS Forge talk (Post)}
EtherCAT is a point-to-point protocol so it doesn't need a unique MAC address. It would be very useful to set the MAC address to 020000000000, the standard address for this kind of application. (The important bit is the 02 at the start of the address, which means locally-administered MAC.) The stock Windows driver can do this for my i210 card. But the CODESYS CmpEt1000MPD driver cannot. The image shows the setting with the Windows driver. If I set all my customers' cards to this address, then I don't need to deal with this when deploying my application. A simple PowerShell script can be used to set the MAC address once when the NIC is installed and the driver is changed.
Last updated: 2026-02-09

Post by dosnova on *exception* [processorloadwatchdog] occurred in: app=[all], task=[all] ^{CODESYS Forge talk (Post)}
Weintek Codesys firmware update does not solve this problem..
Last updated: 2026-02-10

*exception* [processorloadwatchdog] occurred in: app=[all], task=[all] ^{CODESYS Forge talk (Thread)}
exception [processorloadwatchdog] occurred in: app=[all], task=[all]
Last updated: 2026-02-10

Post by dosnova on *exception* [processorloadwatchdog] occurred in: app=[all], task=[all] ^{CODESYS Forge talk (Post)}
I've the same problem. I'm not able to solve..
Last updated: 2026-02-10

Post by nano on CODESYS and Github Copilot ^{CODESYS Forge talk (Post)}
your Project is allways written in st? then have a look at the FBS from PDE. schould solve parts of the job
Last updated: 2026-02-11

Post by konstantin on Lenze i950 Servo and WAGO PFC200 ^{CODESYS Forge talk (Post)}
Hello, In our workshop we have a Lenze i950 servo drive that has an EtherCAT bus and CiA402 compatibility. The WAGO is PFC200 750-8212 and as per documentation it has built-in license for SoftMotion Light functionality. It is not capable of supporting the full SoftMotion functionality like gearing and synchronizing. I added the EtherCAT esi files from Lenze and the EtherCAT master does see the drive, then I added a SoftMotion Light Axis object. The problem is that I can only energize the axis, I cannot execute any other commands. I set the positive and negative torque limits from the PDOs to 200% and when I try to move the axis by force it does not move back to its original position. I use the SML function blocks from the PLCOpen library and the error from the function blocks is that the op mode cannot be changed. Then I tried using a standard SoftMotion axis object and everything works fine, except the MC_Home function block. The axis moves back to its position when forced out of it. I follow this guide from Lenze - Lenze i950 CODESYS V3 What could cause this issue with the SoftMotion Light axis object? Best Regards Konstantin Kolev
Last updated: 2026-02-11

Post by dvmaris on Control for Linux ARM64-User Management issue ^{CODESYS Forge talk (Post)}
I'm trying to work with Codesys Control for Linux ARM64 SL 4.18.0.0 on a Toradex Verdin NXP iMX8MP. I have the runtime installed and operational as well as Codemeter lite 8.40.7141.503 (arm64). I'm running 3.5.20.60 and when "Scan Network" I see the Verdin popup. When I try to connect to it, the "mandatory use of the user management" popup shows...which makes sense. I click YES and enter user information and click OK. It immediately displays a "No device is responding to the scan request" popup. The IDE can see the Verdin in the scan...so this popup does not make sense to me. I thought maybe it was a read only issue but I've made all partitions and paths RW. Has anyone experienced this? Can anyone tell me where it is trying to write user data?
Last updated: 2026-02-11

Post by pernockham on Gateway in China - "Gateway not connected" ^{CODESYS Forge talk (Post)}
Some new test. Now I cannot connect from Automation server to my gateway in any way also from my office setup with my unit directly connected to my router by dhcp. I can use the IDE and the tool "Connect Edge Gateway" and successfully connect to my server/link to my Automation server account. However no PLC will respond from Automation server "Network scan". I guess the traffic should be initiated by the gateway towards automation server? Any tips on how I can diagnose my problem? Ports to be opened etc? Thing is that this has been working previously but not now (base system has been updated from debian 12 to debian 13, but I dont know at which point it has stopped working). Setup as before. A "Codesys Control for Linux SL" running on a debian 13 installation. Any help/tips appreciated! Per Update. Found the error. Had a wrong gateway-setting. Which meant the PLC could not reach internet. Checked by "ping google.com" from the PLC.
Last updated: 2026-02-12

Post by yoeri on Python script: Launch Codesys, Execute Script, Exit Codesys ^{CODESYS Forge talk (Post)}
For whoever finds this old thread. Instead of System.exit(0), use system.exit(0) without capital 'S', this worked for me. I use these imports from future import print_function import sys import os
Last updated: 2026-02-12

Python script: Launch Codesys, Execute Script, Exit Codesys ^{CODESYS Forge talk (Thread)}
Python script: Launch Codesys, Execute Script, Exit Codesys
Last updated: 2026-02-12

Post by konstantin on CAM Motion Recover after STO ^{CODESYS Forge talk (Post)}
Hello, one of the projects I work on is about a racetrack collator with two independent belts on it - two different servo motors. Both motors share the same mechanical frame and there is a train on a belt that collects items from the input conveyor. The way the motion is performed is the following - there is a virutal master axis and both real axis are synchronised with different cam motion profiles. The problem is when an STO is triggered on any of the slave axis, the synchronization process starts from position 0 of the slaves. How can I force the slaves to retain their current position until the master passes their position? Then the slaves should catch up with the master according to the profile, the slaves should not start synchronization from 0 position. Best Regards Konstantin Kolev
Last updated: 2026-02-12

Post by dvmaris on Control for Linux ARM64-User Management issue ^{CODESYS Forge talk (Post)}
It was just that easy. Thanks @eschwellinger
Last updated: 2026-02-12

Control for Linux ARM64-User Management issue ^{CODESYS Forge talk (Thread)}
Control for Linux ARM64-User Management issue
Last updated: 2026-02-12

Post by gseidel on CAM Motion Recover after STO ^{CODESYS Forge talk (Post)}
Dear Mr. Kolev, can you please explain a little more: what happens at an STO? I assume the slave axes will be stopped and retain their current position? How, then, do you call MC_CamIn after the STO? Do you restart it with a new rising edge, but on the same master position as before the STO? Which StartMode are you using, is the cam slave absolute or relative, master absolute or relative? Are the slave axes modulo or finite axes? Best regards, Georg Seidel
Last updated: 2026-02-13

Post by risele on dynamic modbus devices ^{CODESYS Forge talk (Post)}
Have the same issue: I'm making a test setup for modbus devices testing and calibration. One is run for every possible address, and it starts with minimal request: if the device is found, it continue to work with it, otherwise it's set to Disabled temporary. Those state machines are running under FOR cycle, and disabled are just skipped. Every instance have its own timer for not running too frequently and a start delay, so the actual requests are separate in time. I also check not for a single error, but have some timer to allow one-two timeouts. The small program disables and re-enables devices temporary (manually, since i could not iterate over MB devices). VAR Reset:ARRAY[1..GVL_MB.MD_COUNT] OF R_TRIG; i:INT; END_VAR {IF hasconstantvalue(GVL_MB.MD_COUNT, 1, >= )} i:=1; MD_1.Enable:=GVL_MB.MDPortsEnable[i]; Reset[i](CLK:=GVL_MB.MDPortsEnable[i]); MD_1.xReset:=Reset[i].Q; {END_IF} {IF hasconstantvalue(GVL_MB.MD_COUNT, 2, >= )} i:=2; MD_2.Enable:=GVL_MB.MDPortsEnable[i]; Reset[i](CLK:=GVL_MB.MDPortsEnable[i]); MD_2.xReset:=Reset[i].Q; {END_IF} There is also program to re-enable devices periodically. METHOD ScanBus VAR_INPUT END_VAR VAR j:INT; (*block auto scanning if calibration is running for any device since it's data-reach process that should not be interrupted with modbus timeouts *) CalibrationBusy:BOOL:=FALSE; END_VAR CalibrationBusy:=FALSE; FOR j:=1 TO GVL_MB.MD_COUNT DO CalibrationBusy:=CalibrationBusy OR MD_Calibrate.AutoTesters[j].xBusy; END_FOR; IF CalibrationBusy THEN RETURN; END_IF tBusScanSchedule(IN:=(NOT tBusScanSchedule.Q), PT:=tBusScanPeriod); IF (NOT tBusScanDelayer.Q) AND (tBusScanSchedule.Q OR (NOT xFirstScanPerforemed)) THEN xBusScanBusy:=TRUE; MissingCounter:=0; xFirstScanPerforemed:=TRUE; FOR j:=1 TO GVL_MB.MD_COUNT DO (* MD_Calibrate is main calibration program. Identifiers - is array of State machines mentioned above Phase_Faulted is a state of Identifiers where I'm sure device is missing on the bus *) IF MD_Calibrate.Identifiers[j].state=eStateMDIdentifier.Phase_Faulted THEN MD_Calibrate.Identifiers[j].Rescan(); MissingCounter:=MissingCounter+1; END_IF END_FOR END_IF tBusScanPauser(IN:=tBusScanDelayer.Q AND (MissingCounter>0),PT:=tBusScanDelay*MissingCounter); xBusScanBusy:=tBusScanPauser.Q; xFirstScanPerforemed:=xFirstScanPerforemed OR tBusScanPauser.ET>=tBusScanPauser.PT; Also the GUI have buttons for each address possible that re-enables the device if required.
Last updated: 2026-02-13

Sort by relevance or date