Post by timvh on Device logon problem following fresh install
CODESYS Forge
talk
(Post)
In your project you selected the "CODESYS Control Win V3" as device, but the device you want to connect to is a "CODESYS Control Win V3 x64". Those are not the same. If you double click on the device during the network scan, you will get information that these are not the same, but that you can change the type in your project to the x64 bit type. Another option is to "right-click" on the device in the device tree of your project and select "update device" then select the x64 type.
Last updated: 2024-03-19
Post by eschwellinger on Licensing info not available.
CODESYS Forge
talk
(Post)
check on cli on your device 'cmu -x'
Last updated: 2024-03-19
Raspberry Pi 4 als SPI Slave
CODESYS Forge
talk
(Thread)
Raspberry Pi 4 als SPI Slave
Last updated: 2024-03-19
Post by tama00 on Raspberry Pi 4 als SPI Slave
CODESYS Forge
talk
(Post)
Hallo zusammen, grundsätzlich sollte ja die Möglichkeit bestehen den Raspberry auch als SPI Slave zu nutzen. Leider habe ich kein entsprechendes Projekt gefunden, bei dem dies der Fall war. Kann mir jemand dabei weiter helfen, wie ich bei Codesys Control for Raspberry , die Konfigurationen für den SPI Slave machen kann? Der Master soll ein Microkontroller sein von einem anderen Gerät sein. Ich arbeite noch mit 4.10.0.0 und einem Raspberry Pi 4 Vielen Dank und liebe Grüße
Last updated: 2024-03-19
Post by eschwellinger on Raspberry PI4 Serial Port
CODESYS Forge
talk
(Post)
no config file is ok, the feedback is: your hardware must support this send/receive switching
Last updated: 2024-03-19
Post by squiggleypuff on RemoteTargetVisu creates Unresolved Reference
CODESYS Forge
talk
(Post)
I have a project with a Festo CPX-E-CEC-C1-PN PLC (Run-time version 3.5.12.50) that I have been developing on just fine using Codesys V3.5 SP19 Patch 5 (64bit). I am at the stage where I wanted to use the Festo HMI screen, and have added a RemoteTargetVisu object to my application. After adding this object, I am no longer able to log in to the PLC as I get an Unresolved Reference warning for 'USERMGRUSERGETPROPERTY' towards the end of the download process. I was able to find this post (https://forge.codesys.com/forge/talk/Visualization/thread/fc686a6cb2/) where the two possible solutions are to "set the placeholder to emtpy" or update the runtime. Problem is, I don't know how to do either of these things, as I'm still very green in Codesys land. I'd be happy to update the Festo PLC runtime, as that seems like the better option, but have not had any luck in finding a tutorial for this online. If anyone could point me in the right direction I'd appreciate it.
Last updated: 2024-03-19
Post by eschwellinger on PFC100 Licensing fails
CODESYS Forge
talk
(Post)
possible to use a newer version? maybe it is /var/opt/codesys/cmact_license in your version
Last updated: 2024-03-19
PFC100 Licensing fails
CODESYS Forge
talk
(Thread)
PFC100 Licensing fails
Last updated: 2024-03-19
wiki Discussion
squiggleypuff
wiki
(Discussion)
Forum for wiki comments
Last updated: 2024-03-19
blog Discussion
squiggleypuff
blog
(Discussion)
Forum for blog comments
Last updated: 2024-03-19
Home
squiggleypuff
wiki
(WikiPage)
Project Members: squiggleypuff (admin)
Last updated: 2024-03-19
(no subject)
squiggleypuff
wiki
(Thread)
Last updated: 2024-03-19
wiki Discussion
andy-yemm
wiki
(Discussion)
Forum for wiki comments
Last updated: 2024-03-19
blog Discussion
andy-yemm
blog
(Discussion)
Forum for blog comments
Last updated: 2024-03-19
Home
andy-yemm
wiki
(WikiPage)
Project Members: andy-yemm (admin)
Last updated: 2024-03-19
(no subject)
andy-yemm
wiki
(Thread)
Last updated: 2024-03-19
Post by umdee on Error when monitoring LAD programs
CODESYS Forge
talk
(Post)
System Information from the computer being used: OS Name Microsoft Windows 11 Pro Version 10.0.22631 Build 22631 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Manufacturer Dell Inc. System Model Latitude 5500 System Type x64-based PC System SKU 08B9 Processor Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 2112 Mhz, 4 Core(s), 8 Logical Processor(s) BIOS Version/Date Dell Inc. 1.3.11, 6/11/2019 SMBIOS Version 3.2 Embedded Controller Version 255.255 BIOS Mode UEFI BaseBoard Manufacturer Dell Inc. BaseBoard Product 0M14W7 BaseBoard Version A00 Platform Role Mobile Secure Boot State On PCR7 Configuration Elevation Required to View Windows Directory C:\WINDOWS System Directory C:\WINDOWS\system32 Boot Device \Device\HarddiskVolume1 Locale United States Hardware Abstraction Layer Version = "10.0.22621.2506" User Name CARDASSIA-IX\Engineer Time Zone Eastern Daylight Time Installed Physical Memory (RAM) 16.0 GB Total Physical Memory 15.8 GB Available Physical Memory 4.67 GB Total Virtual Memory 18.5 GB Available Virtual Memory 2.52 GB Page File Space 2.63 GB Page File C:\pagefile.sys Kernel DMA Protection Off Virtualization-based security Not enabled Windows Defender Application Control policy Enforced Windows Defender Application Control user mode policy Off Device Encryption Support Elevation Required to View Hyper-V - VM Monitor Mode Extensions Yes Hyper-V - Second Level Address Translation Extensions Yes Hyper-V - Virtualization Enabled in Firmware Yes Hyper-V - Data Execution Protection Yes
Last updated: 2024-03-19
Device logon problem following fresh install
CODESYS Forge
talk
(Thread)
Device logon problem following fresh install
Last updated: 2024-03-19
Device User Logon
CODESYS Forge
talk
(Thread)
Device User Logon
Last updated: 2024-03-19
Assertion Failed
CODESYS Forge
talk
(Thread)
Assertion Failed
Last updated: 2024-03-19
Post by mp9876 on Device logon problem following fresh install
CODESYS Forge
talk
(Post)
Yes it had been the case I believe as I have seen that message regarding they were not the same. I had update the device though to match them and that still did not fix the problem. I gotta say I wanted to get out of that situation and attempted a lot of things and then I did two things at the same time that fixed my problem: Wiped the 64 bit version and installed the 32 bit version Installed latest SP20 I wish I knew which one of these actions fixed the problem but now I gotta catch up on this IDE learning; it's been quite a learning experience I have to say! Thank you very much for your time and advice; much appreciated!
Last updated: 2024-03-19
Post by mp9876 on Device User Logon
CODESYS Forge
talk
(Post)
Following up on the invalid user authentication on the target Not 100% sure what the problem was but following my post I managed to create an administrator level user. Then my next issue was that I could not connect to the device. I might have flipped the device from a 64 bit version to a 32 bit version so I did UPDATE DEVICE back to the 64 bit version; still could not connect somehow. Then I did two things at the same time that fixed my problem: Wiped the Codesys Control Win 64 bit version and installed the 32 bit version Installed latest Codesys Control Win V3.5 SP20 (released today) I wish I knew which one of these actions fixed the problem but at least the problem is solved. Hoping this post may help someone one day
Last updated: 2024-03-19
Post by andy-yemm on Assertion Failed
CODESYS Forge
talk
(Post)
I had similar assertion failed error messages today. I am fairly new to Codesys. I tried using SFC for the first time, I usually use ST. Anyway I had errors in some of my transitions. I copied and pasted transition code and forgot to change the target of the code. I started getting lots of the assertion errors but now I have sorted out the problems and it compiles OK the assertion error messages seem to have stopped. There do not seem to be any other responses to your post, did you resolve your problem?
Last updated: 2024-03-19
Post by superjojo2002 on Licensing info not available.
CODESYS Forge
talk
(Post)
I checked it using the very same docker container version like colleague moon and the command returned root@nt0001c02c5533:/# cmu -x cmu - CodeMeter Universal Support Tool. Version 7.60c of 2023-Aug-09 (Build 5625) for Linux/ARMHF 64-Bit Copyright (C) 2007-2023 by WIBU-SYSTEMS AG. All rights reserved. Result: 0 CmContainer(s) listed. (CodeMeter not running) Please consider that we intend to license a codesys ARM64 SL in a docker container.
Last updated: 2024-03-20
Post by thewizard8 on Raspberry PI4 Serial Port
CODESYS Forge
talk
(Post)
Hi thanks once again, Yes it supports because using python scripting I'm able to send data from the rasberry raspberry and receive it on my pc and vice versa (Image attached). But when using the CoDeSyS I just got red flags. Any light on this problem?
Last updated: 2024-03-19