Post by andrea199403 on Assigning Modbus addresses to a structure in a dynamic way ^{CODESYS Forge talk (Post)}
Hello everyone, I am new to this forum and I am also new to Codesys programming. My problem is this: I have a STRUCT of 64 bool and 30 real, this STRUCT is assigned in the programme 9 times. Now I need to communicate with an HMI via Modbus and I have defined the slave device and created the holding registers for communication. I would like to declare the first call of the STRUCT on the Modbus registers %QX2000.0 to %QX2007.7 for the booleans and on the registers %QW1004 to %QW1034 for the real registers. That said, I would like to change an index and set an offset of 100 bytes for the calls of the other 8 assignments, so that the result is: %QX2100.0 to %QX2107.7 for the booleans and on the %QW1104 to %QW1134 registers for the Real registers, etc. Is there a way to declare this? Thank you very much.
Last updated: 2025-10-21

Post by jtebokkel on VAR_GENERIC unknown token ^{CODESYS Forge talk (Post)}
The help says VAR_GENERIC exists, but trying to use it in 3.5.21.30 results in a unknown token error. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_vartypes_var_generic_constant.html Did this feature get removed or is there something else that needs to be done to enable using generic function blocks?
Last updated: 2025-10-21

Post by alimans on Unrecoverable SoftMotion state after switch to PreOp ^{CODESYS Forge talk (Post)}
Hi Kim, Hi eschwellinger, how you could solve the problem? I am using Codesys V3.5.19.60 and I still have the same problem. It will work only after a warm/cold restart. Thank you in advance for your kind help.
Last updated: 2025-10-22

Post by ahmed-abohelal on SysComRead Timeout Parameter ^{CODESYS Forge talk (Post)}
Hello I was facing the same problem i have to increase the timeout since the unit looks like to be in us SysComread(hCom:=hCom,pbyBuffer := ADR(readBuffer[0]),ulSize:=128,ulTimeout:=3000000,pResult:= ADR(readRes));
Last updated: 2025-10-22

Post by eschwellinger on License Reset Request – CODESYS Control Win V3 Standard L ^{CODESYS Forge talk (Post)}
Please write these kind of request to 'my question' in the CODESYS Store. please do not use ticket and softcontainer numbers here.
Last updated: 2025-10-23

Post by vtec35 on search runtime 4.9.0.0 for pi 3 ^{CODESYS Forge talk (Post)}
i have update the package 4.13 n the computer and install all update for all package, now impossible to start codesys... when i start to open any project i have a message invalid project...
Last updated: 2025-10-26

Post by eschwellinger on search runtime 4.9.0.0 for pi 3 ^{CODESYS Forge talk (Post)}
sorry I missed to say how to do this just update the runtime. (extract latest debian package out of the CODESYS package) but 8n this case an update all to the latest version including CODESYS is probably the easiest option now.
Last updated: 2025-10-26

Post by kporter on SoftMotion, accessing PDO input data via object ref/pointer ^{CODESYS Forge talk (Post)}
It looks like one can use the OutputData and InputData members of ETCSlaveStack: https://content.helpme-codesys.com/en/libs/EtherCATStack/4.2.0.0/EtherCATStack/ETCSlaveStack.html
Last updated: 2025-10-29

Post by jeroenaero on Difference between using OPCUA symbol configuration and OPCUA Server object ^{CODESYS Forge talk (Post)}
Hi, What is exactly the difference between using symbol configuration as OPCUA server or using the Codesys object OPCUA server? What are the advantages and disadvantages of using symbol configuration and OPCUA server object. Please let me know
Last updated: 2025-10-30

Post by kporter on Exception with ReadNbrSlaves function ^{CODESYS Forge talk (Post)}
I've been playing with the code using the Windows soft master and the ReadNbrSlaves function block seems to work here: https://content.helpme-codesys.com/en/libs/EtherCATStack/4.8.0.0/EtherCATStack/pou-ETCMasterStack/DynamicConfig/fld-DynamicConfig.html
Last updated: 2025-10-31

Post by gcodejedi on The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Post)}
Hello, I am experiencing this exact same issue. Were you able to get yours resolved? If so, would you mind sharing the solution you discovered? Thanks!
Last updated: 2025-11-03

Post by davidbo on How to stay in a method until something is finished. ^{CODESYS Forge talk (Post)}
You never stay in a method. You need a block to do that. Something like: VAR button:BOOL:=FALSE; count:UINT:=0; END_VAR IF button THEN //read pressure count:=count+1; IF count>1 THEN button:=FALSE; count:=0; END_IF END_IF
Last updated: 2025-11-04

Post by davidbo on What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask() ^{CODESYS Forge talk (Post)}
I have done: systemctl stop dhcpcd sudo ip addr flush dev eth0 sudo ip link set eth0 up but a call to SysSockSetIpAddressAndNetMask does not give the eth0 an IP address Why?
Last updated: 2025-11-04

Post by tobifenny on Modbus TLS Kommunikation ^{CODESYS Forge talk (Post)}
Hier ist das handbuch: https://www.kostal-solar-electric.com/fileadmin/downloadcenter/kse/BA_KOSTAL_Interface_KSEM_DE.pdf Im Kapitel 1.3.2 ist das mit dem TLS beschrieben und in Kapitel 3.6.2 sind die Modbus-Register beschrieben.
Last updated: 2025-11-06

Post by kalmeyer on Stepper motor control with (SM_Drive_RaspStepper_direct) ^{CODESYS Forge talk (Post)}
I have installed: SM_Drive_PosControl 4.18.0.0 and SM_Drive_RaspiStepper_Direct 0.0.0.7 and SM_Drive_RaspiStepper_PulsDir 0.0.0.7 And when I "Generate Code" I immediately get 6 errors (see attached file) What can I do?????
Last updated: 2025-11-09

Post by ranadheer on conformation about the CODESYS Extends SL and CODESYS SDK ^{CODESYS Forge talk (Post)}
hello everyone would anyone here respond, Is CODESYS Extends SL and CODESYS SDK are same. If both are not same could you please give related data about this. Best Regards Ranadheer
Last updated: 2025-11-10

Post by kalmeyer on Stepper motor control with (SM_Drive_RaspStepper_direct) ^{CODESYS Forge talk (Post)}
Is there perhaps a place where I can see examples of programming with different instructions? This would be a great help. Maybe there are some places where ready-made programs are posted that can be downloaded and tested? /Klaus
Last updated: 2025-11-10

Post by nano on conformation about the CODESYS Extends SL and CODESYS SDK ^{CODESYS Forge talk (Post)}
as an oem i can tell you, extension sl isn't the sdk. its more an hard restricted part of it with much missing parts. why u may ask this?
Last updated: 2025-11-11

Post by eschwellinger on Stepper motor control with (SM_Drive_RaspStepper_direct) ^{CODESYS Forge talk (Post)}
.. try to use this projectarchive for the Stepper. In case you search for SoftMotion Examples: "c:\Program Files\CODESYS 3.5.21.X\CODESYS\CODESYS SoftMotion\Examples\Tutorial\"
Last updated: 2025-11-11

Post by davidbo on What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask() ^{CODESYS Forge talk (Post)}
I have now and it works. I had the idea that it had something to do with codesyscontrol.cfg, but where can I find a description of all the things you can set in codesyscontrol.cfg and its syntax?
Last updated: 2025-11-12

Post by jonasz on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
After carefully studying the documentation, I have a question: is a second hardware-independent time source required for the correct operation of the VirtualSafety system?
Last updated: 2025-11-17

Post by bruno-roth on 22kW Wallbox mit Modbus ^{CODESYS Forge talk (Post)}
Hallo, das ist wohl das falsche Forum für Wallboxen :-) Aber ich empfehle dir Die GO-E-Charger die hat eine sehr offene Schnittstelle und API auch mit Modbus TCP https://github.com/goecharger/go-eCharger-API-v2/blob/main/modbus-de.md
Last updated: 2025-11-17

Post by tristan on Textfield display problem ^{CODESYS Forge talk (Post)}
Hello everyone, I have a little problem with textfield display. When I put a solid backgroud, no problem. But when I put it to invisible, some strange things appears with the text. Do you have this kind of issues ? Thanks a lot, Tristan
Last updated: 2025-11-20

Post by jonasz on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
Thank you for your response. Is there documentation for the commands? I spent a lot of time trying to figure this out. I have a potato computer at home, so I'll have to test this later.
Last updated: 2025-11-21

Post by eschwellinger on EtherCAT status errors ^{CODESYS Forge talk (Post)}
Setting IRQ priorities using shell commands irq-list and irq-set-prio for the network adapter which is used for Ethercat. This is here: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_performance_optimization_linux.html
Last updated: 2025-11-25

Sort by relevance or date