Post by dhumphries on WAGO PLC 200 750-8216 Ethernet connection to Codesys 3.5 ^{CODESYS Forge talk (Post)}
make sure the PLC and the programming PC have IP addresses that are on the same subnet, you'll have to know the default address of the PLC or you may need to connect to it with a special cable and use a software tool to set the IP address.
Last updated: 2024-02-06

Post by matt-purcell on Which Lib to use, connect to a socket with URL instead of IP address ^{CODESYS Forge talk (Post)}
I've been searching through these libraries, syssocket and net base services and they all seem to use the same structure for IP address for the connect function, SOCKADDRESS. At a glance, it doesn't look like that'll work, maybe it's just missing in the documentation somewhere?? I'm wondering if anyone has done it.
Last updated: 2024-06-17

Post by gorditron on I2C Communication with ^{CODESYS Forge talk (Post)}
Hello, I have problems with the I2C communication to an ADS7828 AD converter. I don't get any value back from the chip. I use a Kontron chip (ARM 32SC) with Linux as the operating system. I also use the CmpCharDevice library. ADS7828 parameters Address: A1 = 0 / A0 = 0 = SD = 1 = Single End C2 = 0 / C1= 0 / C0= 0 / Channel 0 PD1 = Internal Reference and PD0 = AD Converter ON Here is my code: VAR b_i2cAdr : BYTE := 16#48; (* Standard I2C-Adresse des ADS7828 *) x_Init: BOOL;(* Flag für die Initialisierung *) b_config_byte: BYTE;(* Konfigurationsbyte für den ADS7828 *) ab_cmd_buffer : ARRAY [0..0] OF BYTE; (* Buffer für den Befehl *) ab_data_buffer : ARRAY [0..1] OF BYTE; (* Buffer für die empfangenen Daten *) ui_adc_value_1 : UINT; (* Ausgelesener ADC-Wert *) I2C_Handle: RTS_IEC_HANDLE; (* Handle für das I2C-Device *) di_result_open: DINT;(* Ergebnis der Funktionsaufrufe *) di_result_adr: DINT;(* Ergebnis der Funktionsaufrufe *) di_result_wr_cmd: DINT;(* Ergebnis der Funktionsaufrufe *) di_result_rd_cmd: DINT;(* Ergebnis der Funktionsaufrufe *) di_result_close: DINT;(* Ergebnis der Funktionsaufrufe *) END_VAR //*** Init from the I2C communication port *** IF NOT x_Init THEN I2C_Handle := CDOpen(szFile:= '/dev/i2c-0', dFlags:= O_RDWR, pResult:= ADR(di_result_open)); //* I2C opening * //*** set of the I2C address *** CDIoctl(hFile:=I2C_Handle , dRequest:=1795 , dParameter:=b_i2cAdr , pResult:=ADR(di_result_adr) ); x_Init := TRUE; END_IF (* Hauptlogik *) IF I2C_Handle <> 0 THEN (* Konfigurationsbyte setzen: Single-Ended Kanal 0, interne Referenz *) b_config_byte := 16#8C; (* 10001100b: AIN0, interne Referenz, Single-Ended *) ab_cmd_buffer[0] := b_config_byte; (* Schreiboperation zum Konfigurieren des Chips *) CDWrite(hFile:= I2C_Handle, pbyBuffer:= ADR(ab_cmd_buffer), udCount:= SIZEOF(ab_cmd_buffer), pResult:= ADR(di_result_wr_cmd)); IF di_result_wr_cmd = 0 THEN (* Leseoperation, um den ADC-Wert zu erhalten *) CDRead(hFile:= I2C_Handle, pbyBuffer:= ADR(ab_data_buffer), udCount:= SIZEOF(ab_data_buffer), pResult:= ADR(di_result_rd_cmd)); IF di_result_rd_cmd = 0 THEN (* ADC-Wert aus den Daten extrahieren *) ui_adc_value_1 := SHL(TO_UINT(ab_data_buffer[0]), 8) OR TO_UINT(ab_data_buffer[1]); ELSE (* Fehler beim Lesen der Daten *) ui_adc_value_1 := 0; (* ADC-Wert auf 0 setzen *) END_IF ELSE (* Fehler beim Schreiben der Konfiguration *) ui_adc_value_1 := 0; END_IF END_IF
Last updated: 2024-12-13

Post by szotyi on Array of Program ^{CODESYS Forge talk (Post)}
Hi! What is the proper and the easiest way to call programs through looping of array of programs, or pointer of program? instead of calling the programs one by one: prog1(inputX: 11); prog2(inputY: 12); prog3(inputZ: 13); similar like: VAR programsToCall : ARRAY [1..3] OF PROGRAM; END_VAR programsToCall[1] := prog1(inputX: 11); programsToCall[2] := prog2(inputY: 12); programsToCall[3] := prog3(inputZ: 13); FOR i := 1 TO 3 DO programsToCall[i] (); END_FOR Thanks.
Last updated: 2024-08-28

Post by garrian on How to write multiple coils (Modbus FC15) ^{CODESYS Forge talk (Post)}
Thanks for your reply. I belive it is contiguous, I'm writing to adress 0 to 4. Or, do you mean something else? Well, something is happening. If I on the client set adress 1,2,3 to true, only 1 is set to true on the server side. On the client side, the data is array of word. But on the server side, the coils are array of bool. Holding register is array of word on server side. Can this be a problem? Attached screenshot of how it looks at the server side.
Last updated: 2024-11-17

Post by rodberna on Library for arrays ^{CODESYS Forge talk (Post)}
Hi, I'm creating a program where I need to handle arrays, like: - Declare lenght variable arrays - [array(1..var) of "sometype"]. This is not possible in pure codesys, right? - Know array lenght, min, max, avg values in runtime - append/delete itens in an array - and so on Is there a library know for this in codesys. Is it possible to build our own libraries using some high level language like python or java script?
Last updated: 2024-01-10

Post by bertrand-major on Cancelling a selection from a "combobox array" in Visu ^{CODESYS Forge talk (Post)}
Hi Joanm, Did you get an answer from anybody in anather section ?
Last updated: 2024-07-17

Post by vladimirsmall on Send data to USB ^{CODESYS Forge talk (Post)}
Hello/ Need send some file ( for example Array of string) to USB. Which library need used for this. Thank you
Last updated: 2024-07-20

Post by pilouuu on problem OPC UA array ^{CODESYS Forge talk (Post)}
Hello, why can't I read the arrays on my PLC's UA OPC server with codesys, even though they are accessible from UA Expert?
Last updated: 2025-02-26

Post by pilouuu on problem OPC UA array ^{CODESYS Forge talk (Post)}
Hello, why can't I read the arrays on my PLC's UA OPC server with codesys, even though they are accessible from UA Expert?
Last updated: 2025-02-26

Post by timvh on control loop library IIR filter ^{CODESYS Forge talk (Post)}
In the Control Loop Library package are multiple example projects, including one for the filters. Program containing: GVL.filterIIR( xEnable:= GVL.xEnableFilter, lrValue:= GVL.lrYOriginal, lrFilteredValue=> GVL.lrOutputIIR); GVL.filterFIR( xEnable:= GVL.xEnableFilter, lrValue:= GVL.lrYOriginal, lrFilteredValue=> GVL.lrOutputFIR); GVL.filterSOS( xEnable:= GVL.xEnableFilter, lrValue:= GVL.lrYOriginal, lrFilteredValue=> GVL.lrOutputSOS); GVL containing aCoefficientsA_IIR : ARRAY[0.. 4] OF LREAL := [1,-2.3695130071820376,2.31398841441588,-1.0546654058785676,0.18737949236818494]; aCoefficientsB_IIR : ARRAY[0.. 4] OF LREAL := [0.0048243433577162282,0.019297373430864913,0.028946060146297369,0.019297373430864913,0.0048243433577162282]; filterIIR : Ctrl.Filter_IIR := (palrCoefficientsA:= ADR(GVL.aCoefficientsA_IIR), udiSizeCoefficientsA:= SIZEOF(GVL.aCoefficientsA_IIR), palrCoefficientsB:= ADR(GVL.aCoefficientsB_IIR), udiSizeCoefficientsB:= SIZEOF(GVL.aCoefficientsB_IIR)); aCoefficientsB_FIR : ARRAY[0.. 5] OF LREAL := [0.01982722552692669,0.1325131219866022,0.34765965248647102,0.34765965248647107,0.13251312198660226,0.019827225526926694]; filterFIR : Ctrl.Filter_FIR := (palrCoefficientsB:= ADR(GVL.aCoefficientsB_FIR), udiSizeCoefficientsB:= SIZEOF(GVL.aCoefficientsB_FIR)); aCoefficientMatrix_SOS : ARRAY[0.. 1] OF Ctrl.FilterCoefficients_SOS := [(b0:= 1, b1:= 2, b2:= 1, a0:= 1, a1:= -1.048599576362609, a2:= 0.2961403575616683), (b0:= 1, b1:= 2, b2:= 1, a0:= 1, a1:= -1.320913430819428, a2:= 0.6327387928852787)]; lrG : LREAL := 0.004824343357716228; filterSOS : Ctrl.Filter_SOS := (paCoefficientMatrix:= ADR(GVL.aCoefficientMatrix_SOS), udiSizeCoefficientMatrix:= SIZEOF(GVL.aCoefficientMatrix_SOS), lrGain:= GVL.lrG); lrX : LREAL; lrYOriginal : LREAL; lrOutputFIR : LREAL; lrOutputIIR : LREAL; lrOutputSOS : LREAL; xEnableFilter : BOOL := TRUE;
Last updated: 2025-08-01

Post by wollvieh on Array of UDT Compare ^{CODESYS Forge talk (Post)}
use sysmemcmp. https://content.helpme-codesys.com/en/libs/SysMem23/Current/POUs/SysMemCmp.html
Last updated: 2024-04-08

Post by kislov on Table How to set row number from 1 ( not from 0) ^{CODESYS Forge talk (Post)}
Use declaration with ARRRAY [1..x] instead of ARRAY [0..x]
Last updated: 2024-05-27

Post by albertovalente on How extract JSONElement containing Array data ^{CODESYS Forge talk (Post)}
Hi Creator: hazarath, Have you fix the problem? because I have the same issue Thanks a lot
Last updated: 2025-11-12

Post by albertovalente on How extract JSONElement containing Array data ^{CODESYS Forge talk (Post)}
Hi Creator: hazarath, Have you fix the problem? because I have the same issue Thanks a lot
Last updated: 2025-11-12

Post by gatto on warning C0195 ^{CODESYS Forge talk (Post)}
I answer myself: xyz : ARRAY [1..10] OF BYTE := [10(BYTE#100)] ; // no warning :-)
Last updated: 2025-11-20

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Hi, Communication with the ADS1115 is actually simple. 1. write config 2. write address pointer 3. read conversation register The ADS1115 works like a multiplexer. This means that you do this individually for each channel that you want to read. e.g: Channel 1: write config > write address pointer > read conversation register Channel 2: write config > write address pointer > read conversation register Channel 3: write config > write address pointer > read conversation register Channel 4: write config > write address pointer > read conversation register then you start again from the beginning You can also omit individual channels or read only one. It doesn't matter. I have written the driver so that I can also use it on the TCA9548. The driver is from Stefan Dreyer. In your case, the driver works and communication with the ADS1115 is running. As you can see, the cfgWrong:=FALSE If you could not write or read data, cfgWrong:=TRUE; This means that either something is wrong with your ADS1115 or you have connected something incorrectly. Question: what voltage do you want to measure?
Last updated: 2024-11-08

Post by timvh on Configuring a 2's compliment ^{CODESYS Forge talk (Post)}
You could create a DUT of the Type Union and add an array of 2 bytes + an Int. Then write the byte values in the array of the Union and read the Int. Or VAR iInt : INT; byHigh : BYTE := 2#1111_1111; byLow : BYTE := 2#1111_1111; END_VAR iInt := TO_INT(byHigh*16#100 + byLow);
Last updated: 2024-09-28

Post by rafaelbrito on The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Post)}
When trying to use the Visualization ToolBox, no objects appear and the following error appears. Could you tell me what this error could be? The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. Can anyone tell me what this error is?
Last updated: 2024-12-03

Post by tvm on Cannot pass array of constant size to a function as a reference ^{CODESYS Forge talk (Post)}
maybe this would be a better approach, then you don't have to pass the constant at all. FUNCTION fun : INT VAR_IN_OUT arr: ARRAY[*] OF INT; END_VAR VAR lower: DINT; upper: DINT; END_VAR lower:= LOWER_BOUND(arr, 1); upper:= UPPER_BOUND(arr, 1); see here as well https://help.codesys.com/api-content/2/codesys/3.5.12.0/en/_cds_datatype_array/
Last updated: 2024-01-08

Post by timvh on Limiting Memory Access of an Array to Within its Bounds ^{CODESYS Forge talk (Post)}
Add the object "POU for Implicit Checks" to your application, then select "Bounds check". This will create a function which is automatically called each time an array is write accessed. In the function you can handle "out of bounds" situations. By default it will be limited to its lower or upper bound.
Last updated: 2024-03-06

Post by bjarne-pagaard on Multiple WebVisu ^{CODESYS Forge talk (Post)}
You can use the switch frame variable, but there should be a variable for each active visu user. You can put the switch frame variable in an array, and use CURRENTCLIENTID as index into the array to get what you want. The CURRENTCLIENTID is assigned to new users automagically by the Visu Management.
Last updated: 2024-03-14

Post by timvh on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
I guess that the printer expects to receive an array of byte values. So where it is described that it expects to receive: Hercules String : 1B4F513030311B7532626C61636B04 it actually expects to receive an array of bytes with the values 1B,4F,51,30,30, etc. So what you can do is create an array of bytes and assign the byte value to each item in the array: VAR abyToSend : ARRAY[0..99] OF BYTE; END_VAR abyToSend[0] := 16#1B; // ASCII Escape character, hexadecimal representation uses 16# as prefix abyToSend[1] := 16#4F; // ASCII 'O' abyToSend[2] := 16#51; // ASCII 'Q' abyToSend[3] := 16#30; // ASCII '0' // you can do the rest yourself // maybe could be created a lot smarter, but gives you an indication how to handle this. Then with the serial communication (or TCP/IP?) you can send a message with the reference to the array (abyToSend) and the number of bytes to send (15 bytes for the string you gave as example).
Last updated: 2025-02-02

Post by laurits on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
Hi, okay here's the project, it's a modified version of "CNC Example 10: Programming Dynamic CNC Paths", no need for G Code text file (i have also tried with G code text file, same problem) in "PROGRAM PLC_PRG" you can set bStart to true, and the program should start running, go to "PROGRAM CNC" and you can see axis moving. lrXpos := IoConfig_Globals.XAixs.fSetPosition; lrYpos := IoConfig_Globals.YAxis.fSetPosition; Now you can can change the number of movements in the the "PROGRAM PLC_PRG" From this number of movements in "program PLC_PRG" BUF : ARRAY[0..32010] OF SMC_GEOINFO; xp : ARRAY[1..32000] OF REAL; yp : ARRAY[1..32000] OF REAL; to this number to this number of movements BUF : ARRAY[0..132010] OF SMC_GEOINFO; xp : ARRAY[1..132000] OF REAL; yp : ARRAY[1..132000] OF REAL; Now if you start the program again you should see an error in the "sMC_Interpolator: SM3_CNC.SMC_Interpolator;" function block Let me know if you can not get it running.
Last updated: 2025-06-03

Post by matt-purcell on Which Lib to use, connect to a socket with URL instead of IP address ^{CODESYS Forge talk (Post)}
Hello, I have a new project and I need to connect to a TCP socket using the URL instead of an explicit IP address, myendpoint@mydomain.com Which library is best suited for this? This is for a new enterprise project, the endpoint is a server in a datacenter running some real time application. We have big IP, it will automatically reassign the IP address to the backup server if a crash occurs so an explicit IP won't work for me. I've done this in RS logix, working now to migrate that code over to codesys. Thanks in advance!
Last updated: 2024-06-17

Sort by relevance or date