Post by reiterf on Visualisierungs-Stil White style, 3.5.16.0 verursacht Überseztungsfehler ^{CODESYS Forge talk (Post)}
Hat sich erledigt, ich habe Codesys 3.5 SP20 Patch5 ganz neu installiert und die Projektdaten in ein neues Projekt kopiert :)
Last updated: 2025-03-06

Post by timvh on Problem Reading Registers via Modbus from non Codesys device ^{CODESYS Forge talk (Post)}
According to the documentation: https://wiki.teltonika-networks.com/view/RUT956_Modbus You need to create a Channel to read 2 registers from address 143 to get the lattitude. It doesn't specify if you need to read it as a Holding Register or as an Input Register. You could try both. So in the Teltonika router, you need to enable it as being a Modbus Server. Then in CODESYS add an Ethernet Adapter, then a Modbus Client (Master) and to the Client (Master) add the Modbus Server (Slave). Set the IP address and add the Channel. The please consider that CODESYS doesn't update any variables when they are not used in the application. In the I/O mapping tab of your I/O configuration, you can set the "Always update" to enabled.
Last updated: 2025-03-08

Post by mehakfatima on Need Help Configuring Energy Analyzers via Modbus TCP & RTU (RS-485) in CODESYS 3.5 ^{CODESYS Forge talk (Post)}
Hello everyone, I am currently working on reading data from energy analyzers using Modbus TCP and RTU (RS-485). In my previous software, I used the following method to add slave devices (i have attached the image) and configure registers: Add the Modbus slave device. Configure the communication parameters (baud rate, parity, etc.). Define the registers and their addresses for data retrieval. Now, I am trying to achieve the same in CODESYS 3.5, but I am not sure how to configure the Modbus master, add slave devices, and set up the registers properly. If anyone has experience with Modbus TCP/RTU setup in CODESYS 3.5, I would really appreciate your guidance! A step-by-step explanation or any references/tutorials would be extremely helpful.
Last updated: 2025-03-13

Post by eschwellinger on Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Post)}
which Hw id has your nic in the windows device manager?
Last updated: 2025-03-18

Post by trebbia92 on Exception when OPCUA datasource disconnects from Server ^{CODESYS Forge talk (Post)}
I have the same issue, after disconnecting->reconnecting ethernet for 5/10 times it goes in exception.
Last updated: 2025-03-20

Post by bkhazaei on BACnet ^{CODESYS Forge talk (Post)}
Hello. Is there an Example for BACnet IP Client in Codesys? An applicable example makes it pretty easy to understand.
Last updated: 2025-03-24

Post by bkhazaei on BACnet ^{CODESYS Forge talk (Post)}
Hello. Is there an Example for BACnet IP Client in Codesys? An applicable example makes it pretty easy to understand.
Last updated: 2025-03-24

Post by damian177 on url String notation ^{CODESYS Forge talk (Post)}
Hi, How to initialize following url: https://mydomain.pl/api/rce-lte?$filter=doba eq '2025-03-18' in sURL : STRING variable ? regards
Last updated: 2025-04-04

Post by sakthivel on Library Files missing Issue ^{CODESYS Forge talk (Post)}
Whn opening the backup file in codesys it showing error (The following librarirs could not load - UNPACK16.lib, IEEE754 library_P.lib
Last updated: 2025-05-15

Post by kut69 on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
Hi, I am interested in details about the .ret file in the filesystem. I have already a project where the file is used (write on demand, read by start) and I want to share it as 'default input' for test devices using the identical application. Opening the .ret file content in a hex editor (I only use a single string retain var) I asked myself what the meaning of the first 24 bytes is. It neither contains a handle to the application nor a reference to the variable. Is this maybe a timestamp? Or a CRC/checksum? Regards, Thomas
Last updated: 2025-05-19

Post by nz-dave on Modbus TCP/IP having problems with global variables ^{CODESYS Forge talk (Post)}
IN THE MAPPING COLUMN, TRY CLICKING THE ICON TO "MAP TO EXISTING VAR"
Last updated: 2025-05-21

Post by chsp on Frustration-Fueled Feedback on Project File Management and Git Integration ^{CODESYS Forge talk (Post)}
Hey CODESYS, we are in 2025. Did you hear about Gibhub Copilot and alternatives? Any ideas?
Last updated: 2025-06-08

Post by george32 on Learning ST in an object-oriented way. ^{CODESYS Forge talk (Post)}
Dear all, I am currently creating a program in the ST language. Because the program is starting to grow nicely I would like to switch to a more object-oriented way of programming. (Like for example in Python). By surfing the internet I found out that Function Blocks is the best method for this. Now I would like to delve further into this, with all the possibilities that Function Blocks have only I cannot find a clear course, explanation of what everything is around the function block thing and how to approach everything. I find the standard documentation around Function Blocks rather abstract and the examples are minimal. Therefore I am looking for a page/course/document explaining object oriented programming in Codesys (or other PLC programming environment). Do you have any recommendations on this?
Last updated: 2025-06-10

Post by tk096 on Velocity is too low even though correct value is reported ^{CODESYS Forge talk (Post)}
Hi, are you sure that you set up the scaling in the Scaling/Mapping tab correctly?
Last updated: 2025-06-12

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
check if the second onwire master is accessible in the configfile path setting. /etc/codesyscontrol/
Last updated: 2025-06-12

Post by latassan on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
Thanks for your answer. In the device tree, I also use CODESYS Control for Raspberry Pi 64 SL, version 4.16.0.0.
Last updated: 2025-06-18

Post by franknator on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
DO NOT use the same username and password in Codesys as your default Rpi OS admin user on the Pi.
Last updated: 2025-06-18

Post by eschwellinger on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
this is a bug in the description, this should work already with latest version.
Last updated: 2025-07-03

Post by eschwellinger on ModbusTCP RaspberryPi zu Fronius Wechselrichter ^{CODESYS Forge talk (Post)}
Schreibe den Slavename(der vom Gerätebaum) in ein Watchfenster dann siehst du Instanz des Modbus Slave Fb's und hast dadurch Diagnose Info
Last updated: 2025-07-04

Post by arwie on downloading safety app in production process ^{CODESYS Forge talk (Post)}
Hi, I am also looking for a way to solve the same issue.
Last updated: 2025-07-06

Post by ganassa on Custom colors in Ladder diagrams? ^{CODESYS Forge talk (Post)}
P.S.: I'd prefer a lighter color because the default blue makes it difficult to tell a normal contact vs. negated, etc.
Last updated: 2025-07-09

Post by joerg-schneider on SVN: "Include externals" Fehlermeldung ^{CODESYS Forge talk (Post)}
Ich habe eine Bibliothek unter Subversion verwaltet und verwende Teile davon in anderen Subversion Projekten mit "Include externals". Wenn man die Bibliothek mit "Copy (Branch/Tag)" kopiert, lässt sich die Kopie nicht mehr mit "Include externals" in anderen Projekten einbinden. Es kommt eine Fehlermeldung, dass ein Pfad nicht gefunden wurde (siehe Anhang). Auch wenn man das Bibliotheksprojekt direkt auf dem SVN Server kopiert (mit Tortoise SVN), kommt die gleiche Fehlermeldung beim Versuch die Kopie mit "Include externals" in anderen Projekten einzubinden. Ich nutze Codesys 3.5.20.60 mit Codesys SVN 4.6.2.0. Wie kann man Projekte auf dem SVN Server so kopieren/verschieben, dass sie später mit "Include externals" in anderen Projekten verwendet werden können?
Last updated: 2025-07-21

Post by pedromarquez on Codesys C Implemented Library ^{CODESYS Forge talk (Post)}
I have the same situation i manged to import the library but there is no documentation in how to use it
Last updated: 2025-07-24

Post by pedromarquez on Codesys C Implemented Library ^{CODESYS Forge talk (Post)}
I have the same situation i manged to import the library but there is no documentation in how to use it
Last updated: 2025-07-24

Post by dinesh-vamtec on (no subject) ^{CODESYS Forge talk (Post)}
Hello everyone, I'm trying the multiple user management in codesys visu. Could you please assist me.
Last updated: 2025-08-13

Sort by relevance or date