Post by eschwellinger on How to configure CODESYSControl_User.cfg in order to use a specific network card for OPCUA Server ^{CODESYS Forge talk (Post)}
Hi Rossano, thank you for the feedback, you are right this need to be changed in the faq section. Regards Edwin
Last updated: 2023-08-28

Post by yr00 on OPC UA datasource low read frequency ^{CODESYS Forge talk (Post)}
Hello everyone, I am trying to test the OPC UA client feature in Codesys. My setup is the following; I have a Codesys simulation/ visualization running on Control Win V3. My OPC UA server is hosted on a Siemens 1518 PLC using PLCSim Advanced. The setup is completely virtual so there are no really PLCs. Everything is on my laptop. Writing data from the Codesys simualtion to the server is very quick. I have a PLC program running on another 1500 PLC which reads data from simulation via the server, and changes in the simulation (e.g. button pressed) appear within hundreds of miliseconds if not tens of miliseconds in my PLC program. However, when it comes to reading data from the OPC UA Server by Codesys, it taks around 1-2s. I connected a UAExpert client and it gets update very quickly so I am fairly sure the problem is with Codesys. I have tried changing the update rate in datasource -> General and Diagnosis, but it doesn't seem to have an effect. Do you guys have any suggestion on what I can do?
Last updated: 2023-08-29

Post by eschwellinger on CSVReaderInit returns error : INVALID_HANDLE ^{CODESYS Forge talk (Post)}
this is a security issue not to read/write in the plc allowed path I would recommend to update and change the path in the application were the files are😏
Last updated: 2023-08-30

Post by totorovic on CSVReaderInit returns error : INVALID_HANDLE ^{CODESYS Forge talk (Post)}
Thank you for the return. The path targets to a CFast card. User has R/W access to it. We will try to change it.
Last updated: 2023-08-31

Post by garyl on Comments in arrays and assigning RST coil's to 600 outputs ^{CODESYS Forge talk (Post)}
Hello all, im working on a project that requires me to convert an old automation direct DirectSoft PLC d2-250-1. One of the problems im encountering is that all of the comments are attached to members of the different addresses. When i convert the addresses (1777 "C" registers, 777 X registers, and 20,0000 V registers) im running into difficulties keeping the inputs/outputs correct since they are missing documentation. Is there a good way to retain the comments of the indexes in the array? Secondly, initially i was declaring the "C" and "V" addresses individually and this worked to retain the comments as to which register did what, however i ran into a problem when one rung reset (or set to 0) approximately 600 C Addresses. Since each tag is separately declared this proved to be nearly impossible without a literal wall of code that attempted to crash the program. So i converted all of the registers (C,X,Y,V) into separate structs, declared them as arrays and pointed all of the original call outs in the program to the newly defined structs. However i have now lost comments and the program is very hard to follow. Thanks for any help with this issue.
Last updated: 2023-08-31

Post by eschwellinger on Ethercat scan for devices not picking up EL7041 as a softmotion axis ^{CODESYS Forge talk (Post)}
Add existing version (with SM drive) - without scan - disable under expert settings in the slave the revision check.
Last updated: 2023-09-03

Post by jinil on Import RsLogix 5000 project to Codesys ^{CODESYS Forge talk (Post)}
Hello, I am trying to do the same thing. I want my Rslogix 5000 project into Codesys. Was wondering if you have found a way to do it. Thank you.
Last updated: 2023-09-07

Post by jinil on Import RsLogix 5000 project to Codesys ^{CODESYS Forge talk (Post)}
Hello, I am trying to do the same thing. I want my Rslogix 5000 project into Codesys. Was wondering if you have found a way to do it. Thank you.
Last updated: 2023-09-07

Post by eschwellinger on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
check 'uname -a' by ssh connection - addtional you'll probaly find the reason for not running with application by 'cat /var/opt/codesys/codesyscontrol.log' incase you are using 4.9.0.0 runtime version
Last updated: 2023-09-13

Post by transmin01 on Correct CAN Driver for EL6751 ^{CODESYS Forge talk (Post)}
Hi, does anyone know what is the correct driver name that needs to go into the CodesysControl.cfg file for a Beckhoff EL6751? TIA Trevor.
Last updated: 2023-09-19

Post by marsmaennchen on llcallback() iec exception caught cmpid=0x00000002, eventid=0x00010008 ^{CODESYS Forge talk (Post)}
Never found a solution for that, or an answere that maker sense. Have you found out something New? Greetings Patrick.
Last updated: 2023-09-24

Post by sedoerr on Check For Open Dialogs On Client ^{CODESYS Forge talk (Post)}
You need to create a function around this function to check the dialogs you use in your program. That's the way i have done it.
Last updated: 2023-09-26

Post by sturmghost on Specify Input Configuration "OnDialogClosed" Action to only react to certain Dialogs ^{CODESYS Forge talk (Post)}
You could work around this problem by implementing some sort of "state machine". Each dialog sets a boolean variable when they are closed so you know which dialog was closed. Then you can react to this accordingly.
Last updated: 2023-10-01

Post by arnog on Master&Slave Program in 4 Axis CNC Project ^{CODESYS Forge talk (Post)}
I am also looking for the right solution. Also saw a virtual axes would be better to steer x1 and x2
Last updated: 2023-10-01

Post by tomas111 on Help with error C0142 ^{CODESYS Forge talk (Post)}
There was an exact mistake. I did as they wrote. I created a visualization and transferred it from the old one and everything works. CS 3.5 SP 19. Thank you.
Last updated: 2023-10-04

Post by captaincookie on increase default string length in queue ^{CODESYS Forge talk (Post)}
Hello, I'm using Codesys V3.5 SP18 Patch 4. In the ElementCollectionExample Project from Codesys, I test the SimpleQueueExample in a Control Win V3 x64 environment. I try to add a string of 95 characters length to a queue. The default length of strings is defined as 80 characters. In the initialization of a string variable, it is possible to increase the length by the definition of e.g. STRING(1000). But when I write the string defined like this to the queue, only 80 characters are written to it and the rest is missing. I think the default length is still set in the queue definition, so it is necessary to change this, isn't it? Is there any option to increase the default length of strings in the queue? Attached you can find the used project. Thanks in advance. If any information are missing or my description unclear please let me know.
Last updated: 2023-10-05

Post by aott33 on Webvisu NO load ^{CODESYS Forge talk (Post)}
I put in a support ticket request for this issue since I need this application to be running reliably for my customer's application. Hope to hear back from support soon to troubleshoot this process.
Last updated: 2023-10-09

Post by captaincookie on increase default string length in queue ^{CODESYS Forge talk (Post)}
I solved it by creating a new element of IElement according to the ElementExample (MyElement) in the ElementCollectionsExamples project. The variables in this element can then be defined in any properties as needed.
Last updated: 2023-10-11

Post by anhkdv on Motion FB Error ^{CODESYS Forge talk (Post)}
When I load the SMC_GroupWait command twice in a row into the buffer an error occurs when I try to MC_MoveLinearRelative in the dynamic coordinate system. If I use MC_MoveLinearAbsolute in the dynamic coordinate system, it still works
Last updated: 2023-10-23

Post by oazrad on Async Manager ^{CODESYS Forge talk (Post)}
anyone found any sample code for this library? I'm trying to work with AsyncManager but the documentation is not helping? Surly, codesys when they coded this library they had a sample project to test and simulate the functionality for this library. can you share it please ?
Last updated: 2023-11-15

Post by baldeep on Codesys Raspberry Runtime 4.10.0.0 and RSM Utility 3.5.19.0 ^{CODESYS Forge talk (Post)}
I had been using Codesys Raspberry 4.9.0.0 Runtime for a Project with CAA File 3.5.19.0. But now with Update 4.10.0.0 and Raspberry pi 64 Bit.....i cannot compile my code as RSM Utility 3.5.19.0 is not recognised. Any help? Regards
Last updated: 2023-11-20

Post by annd on Migration von "CODESYS Control for PFC200 SL" zu WAGO FW26 "CODESYS V3.5.19.2" ^{CODESYS Forge talk (Post)}
@pflot59: Thanks, I know this guide but there a slight differences in migrating from eCockpit or from Codesys SL. It is still fine as I wrote above. BR annD
Last updated: 2023-11-23

Post by simotion on Axis variable indicating modulo of finite setting ^{CODESYS Forge talk (Post)}
What variable of the axis indicates it is a modulo of finite axis? I want to check that in the code, to adopt my motion code between the two types.
Last updated: 2023-11-24

Post by ggis on Rasperry Control Debian 12 ^{CODESYS Forge talk (Post)}
From bash I usually see codesyscontrol.service as the runtime service. Taking a step back, I guess you used Tool > Update RaspberryPi SL interface to install the runtime: what does the info popup window tells you about your destination system?
Last updated: 2023-11-26

Post by riccardo on How to allow a user to handle certificates without access to sourcecode? ^{CODESYS Forge talk (Post)}
It would be usefull to me too, I would need to manage HTTPS and OPC UA certificate without perform the access to the whole sorce code project
Last updated: 2023-11-27

Sort by relevance or date