Post by paulpotat on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
Because we bought several raspberry pi licenses that can only be activated with a raspberry pi runtime.
Last updated: 2024-10-17

Post by sebastianrapi on Bibliothek: floatingpointutils ^{CODESYS Forge talk (Post)}
Ich habe nun auch versucht durch die Installation von Codesys Version 3.5.17.0 an die Bib zu kommen... Leider auch ohne Erfolg...
Last updated: 2024-10-18

Post by eschwellinger on Lizenz ausversehen für WORKSTATION statt für GERÄT installiert - wie kann ich diese verschieben? ^{CODESYS Forge talk (Post)}
....der CODESYS Support kann hier helfen
Last updated: 2024-10-19

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
yes add in: c:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSGatewayV3\XXXXXXXX\Gateway.cfg [CmpEdgeGateway] MaintenanceMode=1
Last updated: 2024-10-21

Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Could you please check which EdgeGateway Version is up and running?
Last updated: 2024-10-23

Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi Trent, yes should work without, let me check. Regards Edwin
Last updated: 2024-10-23

Post by ben1 on Alarm Table rows font size not change ^{CODESYS Forge talk (Post)}
the alarm font settings are found in the alarm class setup
Last updated: 2024-10-23

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
No, my vpn is 10.0.0.12. The docker interface is 172.17.0.1.
Last updated: 2024-10-24

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Your right, much easier with Linux control SL ARM. Everything is working.
Last updated: 2024-10-24

Post by selim on RS485 CAN HAT to Cosesys ^{CODESYS Forge talk (Post)}
How can i add RS485(RS485 CAN HAT) port to codesys program?
Last updated: 2024-10-28

Post by eschwellinger on How to use PLC_Open FBs with PROFINET servodrive (PROFIdrive layer) ^{CODESYS Forge talk (Post)}
At the moment, no chance to do this - this is not supported
Last updated: 2024-10-30

Post by andrax on using ADS1115 ^{CODESYS Forge talk (Post)}
I have the ADS1115 running and have no problems. But have you used a level shifter between the ADS1115 and the Raspberry?
Last updated: 2024-11-01

Post by eschwellinger on TargetVisu controls are incorrectly positioned ^{CODESYS Forge talk (Post)}
yes this is a bug, please disable the overlay functionality in the Visualisation Manager in your project
Last updated: 2024-11-03

Post by timvh on Is there a pragma for init/instantiation of local variables in FB (like in Methods) ^{CODESYS Forge talk (Post)}
Do you mean VAR_TEMP? https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_vartypes_var_temp.html
Last updated: 2024-11-05

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I took a look at the xml Is this even the right driver and where did you get it?
Last updated: 2024-11-07

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
The voltage what i want to measure is 3.286v. I can check the voltage through terminal, see screenshots.
Last updated: 2024-11-08

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
You are also missing the libraries. No library should be grayed out or highlighted in blue
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I also have a screenshot of the library versions under your library
Last updated: 2024-11-08

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Can you please make your project available? I'll take a look at it.
Last updated: 2024-11-09

Post by ojz0r on Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Post)}
What you want is to use the CFC language instead of FB.
Last updated: 2024-11-11

Post by mascara on TouchScreen does not work in Webvisualization. ^{CODESYS Forge talk (Post)}
I found the problem. Need to disable Client Animation Support...
Last updated: 2024-11-11

Post by taqamert on CAN communication settings for USB2CAN-C ^{CODESYS Forge talk (Post)}
Did you solve the problem? I need to help same topic
Last updated: 2024-11-12

Post by ben1 on Access Variable Visu Dialog ^{CODESYS Forge talk (Post)}
Tough to know exactly what you are asking for here. Can you give a more thorough explanation and/or provide snips?
Last updated: 2024-11-17

Post by ben1 on How to write multiple coils (Modbus FC15) ^{CODESYS Forge talk (Post)}
If I am understanding what you are saying, then yes that would be your problem. I would create an array of bools on the client side for the transfer and try that. Or if client can't be changed then use words on server and unpack. But I am not sure if you or I are mis interpreting but it sounds a bit jumbled. I don't know what you have control of, but, if you are turning on BITS in the server, you should write to BITS in the client with a Function 15. If you are writing to WORDS in the server, you should write to WORDS in the client with a Function 16.
Last updated: 2024-11-17

Post by fleaplc on File access operation denied ^{CODESYS Forge talk (Post)}
file to access has to be into the path /var/opt/codesys/PlcLogic I has same issue time ago...
Last updated: 2024-11-17

Sort by relevance or date