Post by cihangur on OpC UA server on Raspberry Pi 64 SL runtime ^{CODESYS Forge talk (Post)}
Hello everyone, I wanted to write here because it is a similar and the most up-to-date topic. I want to connect to CoDeSys Win V3 x64 - 3.5.19.50 with OPC UA using WinCC Advanced V17. (Or to a PLC with CoDeSys Version 4.10.0.0) My settings are exactly the same as the previous comment. I even tried many different settings. I can access all CoDeSys OPC UA variables via TIA Portal IDE and add them to my HMI tags. When WinCC RT Advanced is started, it gives a warning that the connection could not be established and does not update the variables. I can connect to Inovance AM600 using CoDeSys Target version 3.5.11.50. (The same version Win x64 is also connected.) However, a security setting in the current versions prevents me. I would be very happy if those who have up-to-date experience on this issue and find a solution share it. The CoDeSys Security Settings which I can access variables with TIA Portal: CommunicationPolicy: POLICY_BASICSHA256SHA256 CommunicationMode: ALL Activation: Activated UserAuthentication: ENABLED Server Certificate: Valid until 2034 Greetings.
Last updated: 2024-12-06

Post by durallymax on Cannot Start Application ControlWin ^{CODESYS Forge talk (Post)}
Using V3.5.19.70 with ControlWin x64 V3.5.19.70. Can start ControlWin and login to ControlWin but play button is grayed out. Under Device>Status ControlWin shows red with "No Driver Found" New laptop just setting up Codesys, Windows 11 24H2 Tried to uninstall and re-install with no success.
Last updated: 2024-12-15

Post by eschwellinger on Newly created texlists wont appear in the selection dropdown ^{CODESYS Forge talk (Post)}
Guess you need to update Visualization Support Package to latest version (4.5.0.0) in case you are using CODESYS Visualization 4.7.0.0
Last updated: 2024-12-18

Post by tk096 on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Hi, can you share a project to reproduce the issue? I wasn't able to reproduce it following these steps.
Last updated: 2024-12-19

Post by gseidel on Beckhoff EL7037 softmotion ^{CODESYS Forge talk (Post)}
Hi Stefan, we will update our driver to support the EL7037 in our next release of SoftMotion. In case you are interested to test a pre-release, please contact our support and mention this forum post. Best regards, Georg
Last updated: 2024-12-23

Post by winki on OPCUA Server With COntrol For Linux Arm64 ^{CODESYS Forge talk (Post)}
Hello, I am wondering if it is possible to have OPCua Server with Control for linux ARM64. Indeed I am not able to add symbol configuration.
Last updated: 2025-01-13

Post by nz-dave on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
I have tried Achives but still get many errors. just now have tried to load a projectachive from last night and the visualization is [unknowen] as well as a action from the main pou.
Last updated: 2025-01-21

Post by nz-dave on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
Thanks Tim that worked well. saved the config from work pc, imported to home laptop. it downloaded packages and the program opened with no errors and started straight up! legend!
Last updated: 2025-01-23

Post by timvh on VisuElems.cmpDynamictext.DynamicTextGetTextW returns pointer to empty string ^{CODESYS Forge talk (Post)}
Try this: VAR sTextList : STRING; END_VAR sTextList := 'NameOfTheTextList'; // call to the function with the address of the string variable which contains the name of the textlist : ... ADR(sTextList), ....
Last updated: 2025-02-07

Post by abrarsk on Download libraries of old versions ^{CODESYS Forge talk (Post)}
You can download the missing libraries by clicking on the "Download Missing Libraries" button. However, if you were unaware of this and accidentally downloaded the latest version of the library from the Library Repository, you may need to uninstall it first to avoid conflicts.
Last updated: 2025-02-11

Post by timvh on "Do you really want to perform" dialog boxes ^{CODESYS Forge talk (Post)}
Double click on the device (communication settings). At the top of this Window, go to Device -Options. Disable the option "Confirmed online mode".
Last updated: 2025-02-15

Post by jddaigle on Webvisu not supported due to missing browser feature HTML5-Canvas ^{CODESYS Forge talk (Post)}
I dont know if you all have access to that ticket, but they are looking at the problem. https://helpdesk.codesys.com/servicedesk/customer/portal/16/USS-1073
Last updated: 2025-02-17

Post by mueadr on J1939 DM1 and Alarm Management ^{CODESYS Forge talk (Post)}
Hello sgronchi, have you found a solution to your problem? I am also trying to link the DM1 DTC with the Alarm Manager from codesys.
Last updated: 2025-02-19

Post by mueadr on J1939 DM1 and Alarm Management ^{CODESYS Forge talk (Post)}
Hello sgronchi, have you found a solution to your problem? I am also trying to link the DM1 DTC with the Alarm Manager from codesys.
Last updated: 2025-02-19

Post by fabiodasilveira on PLC Shell commands via ST Code ^{CODESYS Forge talk (Post)}
Hello Everybody, I have created a project for an Eaton XC303 that sends lots of data to a router via UDP. It works fine. However, when there is more than one product connected to the router, then it is necessary to change the IP address of the Ethernet port 0, from e.g. 192.168.2.11 to 192.168.2.12 (second product). It is easily done via PLC Shell (setipaddr 0 192.168.2.12), but the people in production is struggling with the PLC Shell commands and I would like to create a Visualization page that will hide that. I used the instruction: eChangeIPResult:= SysSockSetIPAddress(strEthernetPort, strIPAddress); and it works, until the PLC resets. I already read some posts and it appears that I need to stop the Ethernet 0 port and Reconfigure it, but I am really struggling to find the right way to do it. Any help will be much appreciated.
Last updated: 2025-02-28

Post by smic on Virtual Control SL Profinet connection ^{CODESYS Forge talk (Post)}
I found the solution. The NIC information on Deploy control SL should be defined to scan profinet devices. So I moved to the next challenge. Device is founded but still it has orange mark not green.
Last updated: 2025-02-28

Post by t-roger on Ethercat hardware connection and scanning ^{CODESYS Forge talk (Post)}
Hi, I tried to connect me in the codesys runtime after adding Ethercat master but I have this error. What can I tried to resolve that? Br
Last updated: 2025-03-04

When running as a service, CodesysControl doesn't write log files to the disk (and other CmpLog related issuess) ^{CODESYS Forge talk (Thread)}
When running as a service, CodesysControl doesn't write log files to the disk (and other CmpLog related issuess)
Last updated: 2025-03-06

Post by ph0010421 on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello SDO will write to the drive, not the axis, so you need to pass in the ethercat slave: VAR_IN_OUT Axis: IoDrvEthercatLib.ETCSlave; END_VAR Then you can get the address with: Axis.PhysSlaveAddr (as UINT)
Last updated: 2025-03-07

Post by timvh on an not create Symbol Configuration in Codesys V3.5 SP20 Patch 4 ^{CODESYS Forge talk (Post)}
Go to the menu Tools - CODESYS Installer. Here you can manage your add-on packages. Go to Browse, find CODESYS Communication and install this add-on.
Last updated: 2025-03-08

[Bug report] Issue with Importing XML Files Containing "POINTER TO" Variables in Codesys Platform Plugins Versions 2.7 and 2.8 ^{CODESYS Forge talk (Thread)}
[Bug report] Issue with Importing XML Files Containing "POINTER TO" Variables in Codesys Platform Plugins Versions 2.7 and 2.8
Last updated: 2025-03-26

Post by mandeepahujaifm on Exception when OPCUA datasource disconnects from Server ^{CODESYS Forge talk (Post)}
@eschwellinger - We are experiencing the exact same issue. RunTime 3.5.19.70 and IDE V3.5 SP21. It's 100% reproducible. All you have to do is disconnect the network cable for about 10 minutes. OPC UA Crashes and requires a reboot to fix.
Last updated: 2025-03-28

Post by benemenn on OPC server in "Communication manager" ^{CODESYS Forge talk (Post)}
Same Issue here. If I understood correctly codesys plans to discontinue the classic SymbolConfigurations. But somehow, the CommunicationManager doesnt seem to support structures or arrays.
Last updated: 2025-03-31

Post by vincerex on SFTP access ^{CODESYS Forge talk (Post)}
hello everyone, is there a library or a way to access to SFTP server using Codesys? SysSocket library is only suitable for FTP it seems. I didn't find any other suggestion on the web Thanks for your help VinceReX
Last updated: 2025-04-01

Post by timvh on Import from XML problem ^{CODESYS Forge talk (Post)}
It is not an error, but just an information message. You need to select the correct location in your device tree where you want to import the objects. E.g. select Application below your Device.
Last updated: 2025-04-30

Sort by relevance or date