Post by fizzy-bubblech on 3.5 P20 hangs - no response ^{CODESYS Forge talk (Post)}
Colleagues, i have the same problems. At the current time, I have to use the new version of the Codesys (3.5.20.10) + Control for Linux SL 4.11.0.0, but it works unstable : theree are a lot of freezes and not-respondings. I tested this on different projects: those that were created in the current version of the project, and those that were migrated from other versions of the development environment. Compiling a project without connecting to a controller is fast enough. The first downloading of the code into the controller, too. But as soon as you need to make edits and download a new code problems begin. Codesys "freezes" at the "Generation code" stage for 15-20 minutes. And only after that time loads the code into the controller. Previously, we used version 3.5.17.60 + Control for Linux SL 4.7.0.0. The process took 1-2 minutes. Do you have any ideas how can i fix it? I will be grateful for your answers.
Last updated: 2024-06-27

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
you need to have an own task for the one wire and io update these slaves in an own low prio task!
Last updated: 2025-10-18

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
the project has only one OneWire Master - so if you add the setting "PlaceholderFilePath.2=/sys/devices/w1_bus_master2, $OneWire2$ to the config file it will fail and the Ethercat task will be blocked by the OneWire Master readings?
Last updated: 2025-10-21

Post by alimans on Unrecoverable SoftMotion state after switch to PreOp ^{CODESYS Forge talk (Post)}
Hi Kim, Hi eschwellinger, how you could solve the problem? I am using Codesys V3.5.19.60 and I still have the same problem. It will work only after a warm/cold restart. Thank you in advance for your kind help.
Last updated: 2025-10-22

Post by eschwellinger on License Reset Request – CODESYS Control Win V3 Standard L ^{CODESYS Forge talk (Post)}
Please write these kind of request to 'my question' in the CODESYS Store. please do not use ticket and softcontainer numbers here.
Last updated: 2025-10-23

Post by vtec35 on search runtime 4.9.0.0 for pi 3 ^{CODESYS Forge talk (Post)}
i have update the package 4.13 n the computer and install all update for all package, now impossible to start codesys... when i start to open any project i have a message invalid project...
Last updated: 2025-10-26

Post by gatto on Backtick identifiers ^{CODESYS Forge talk (Post)}
Hello, I’m in Codesys 3.5.20.40 and I try to declare the variable ´var1´ but I get an error. here : https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_rules.html i read : Backtick identifiers By using backticks, characters can also be used in identifiers that are not normally permitted in identifiers, such as special characters. The acute accent character is used for backticks: ´ (Unicode: U+02CA) The use of backticks is recommended in order to be able to use the same identifiers in CODESYS as in other programming languages or documents, such as circuit diagrams. Any character may be used between two backticks, except line breaks and other backticks. Keywords are also allowed as identifiers between backticks. Examples: ´Variable+9´ ´INT´ The backticks are part of each identifier and therefore var1 and ´var1´ are two different identifiers. Example PROGRAM PLC_PRG VAR var1 : INT; ´var1´: INT; END_VAR var1 := var1 + 1; ´var1´ := 12; Are there any limitations or is something missing in my development environment?
Last updated: 2025-10-28

Post by kporter on SoftMotion, accessing PDO input data via object ref/pointer ^{CODESYS Forge talk (Post)}
It looks like one can use the OutputData and InputData members of ETCSlaveStack: https://content.helpme-codesys.com/en/libs/EtherCATStack/4.2.0.0/EtherCATStack/ETCSlaveStack.html
Last updated: 2025-10-29

Post by kporter on Exception with ReadNbrSlaves function ^{CODESYS Forge talk (Post)}
I've been playing with the code using the Windows soft master and the ReadNbrSlaves function block seems to work here: https://content.helpme-codesys.com/en/libs/EtherCATStack/4.8.0.0/EtherCATStack/pou-ETCMasterStack/DynamicConfig/fld-DynamicConfig.html
Last updated: 2025-10-31

Post by kalmeyer on Stepper motor control with (SM_Drive_RaspStepper_direct) ^{CODESYS Forge talk (Post)}
Is there perhaps a place where I can see examples of programming with different instructions? This would be a great help. Maybe there are some places where ready-made programs are posted that can be downloaded and tested? /Klaus
Last updated: 2025-11-10

Post by nano on conformation about the CODESYS Extends SL and CODESYS SDK ^{CODESYS Forge talk (Post)}
as an oem i can tell you, extension sl isn't the sdk. its more an hard restricted part of it with much missing parts. why u may ask this?
Last updated: 2025-11-11

Post by shaunvdm on OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3 ^{CODESYS Forge talk (Post)}
Hi All, We downgraded Codesys LAD/FB in the IDE to version 4.5 and it works. Codesys Version 4.6 lad/fb not working. Was the way we fixed this. Kind Regards Shaun
Last updated: 2025-11-17

Post by eschwellinger on EtherCAT status errors ^{CODESYS Forge talk (Post)}
Setting IRQ priorities using shell commands irq-list and irq-set-prio for the network adapter which is used for Ethercat. This is here: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_performance_optimization_linux.html
Last updated: 2025-11-25

Post by gseidel on SMC_ERROR.SMC_AXIS_NOT_READY_FOR_MOTION when using Drive Virtual ^{CODESYS Forge talk (Post)}
Hi ducng, you need to make sure that MC_Power.Status is TRUE before you give a rising edge to MC_MoveRelative.Execute. (This is the same for virtual and real axes). Best regards, Georg
Last updated: 2025-11-27

Post by gseidel on STEPPER CODESYS SOFTMOTION_DRIVE ^{CODESYS Forge talk (Post)}
Hi kalmeyer, I would recommend to have a look at these examples. They come with a project and a description: https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_basic_examples_single_axis.html. Best regards, Georg
Last updated: 2025-11-28

Post by gseidel on MC_Phasing state explenation ^{CODESYS Forge talk (Post)}
Hi kenth1973, no, we do not have this kind of information on internal variables. iPhasingState has been removed and is no longer present in current versions of SoftMotion. Best regards, Georg
Last updated: 2025-12-17

Post by baott569 on CODESYS OPC UA Security: HMI Client Not Receiving Server Certificate ^{CODESYS Forge talk (Post)}
Hello everyone, I am currently using OPC UA in CODESYS with the security mode BASIC256SHA256 – Signed and Encrypted. The OPC UA Server is running on an RTE CX device, and the HMI is running on another computer. I have reviewed many CODESYS documents and successfully established communication when the security mode is set to None with Anonymous login. However, when security is enabled, the server does not provide its certificate for the CODESYS HMI client to trust. Interestingly, the client can send its certificate to the server, and UAExpert works normally, but the CODESYS HMI client does not receive the server certificate. Can anyone help clarify what I might be missing? I have been stuck on this issue for three days. If I missed or misconfigured any step, please let me know. I believe I am stuck at step 15 in the following CODESYS guide: Encrypting the Communication of a Data Source OPC UA Client https://content.helpme-codesys.com/en/CODESYS%20Communication/_cds_encrypt_communication_data_sources_opc_ua_client.html Thank you very much.
Last updated: 2026-01-06

Post by kledo5 on What is the CFC editor (page oriented) "Add page" keyboard shortcut? ^{CODESYS Forge talk (Post)}
Thanks for sharing this helpful tip with the tech community; I've learned so much new stuff. Let's take a break and play drift hunters, everyone! This top-notch racing game helps relieve stress after a tiring workday.
Last updated: 2026-01-06

Post by reinier-geers on SYSDIR 3.5.17.0 ^{CODESYS Forge talk (Post)}
I had a funcioning Directory read wit SYSDIR. Now ive got a new controller with Linux. and now i get only ordners Names. NO file Names !! WHY ? It workt already on a other with linux. But that was i think version 14
Last updated: 2026-01-06

Post by reinier-geers on SYSDIR 3.5.17.0 ^{CODESYS Forge talk (Post)}
I had a funcioning Directory read wit SYSDIR. Now ive got a new controller with Linux. and now i get only ordners Names. NO file Names !! WHY ? It workt already on a other with linux. But that was i think version 14
Last updated: 2026-01-06

Post by clockben on Python script to add libraries to project ^{CODESYS Forge talk (Post)}
Hello, I have the same issue — some libraries aren’t resolved. When I load the libraries manually and delete them, reloading with the script works fine afterward. Have you found a solution since then? Many thanks in advance
Last updated: 2025-11-11

Post by davidbo on *EXCEPTION* [ProsessorLoadWatchdog] codesys 3.5.11.40 ^{CODESYS Forge talk (Post)}
Under Application->"Task Configuration" you can find your task double click on that and you will see a fane to the right. You find the watchdog enable switch it off or increase the time
Last updated: 2025-11-17

Post by seler on Custom button with output status ^{CODESYS Forge talk (Post)}
I did some work around by adding IN switch on top of OUT bulb picture(SwitchImage) and setting IN switch button to invisible but this is not quite elegant. How to combine it to one visu element?
Last updated: 2025-11-20

Post by somlioy on Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Post)}
No that is not possible for function blocks, although it is possible to that with methods and functions as you see in your second pic.
Last updated: 2025-12-05

Post by bertus on Can't get SMC_SmoothPath to work ^{CODESYS Forge talk (Post)}
Hi Georg, thanks for your time. What is the value of D_ANGLE_TOL? It is set to 0.01. Do you need the assignment bAbort := NOT bDecoder? Does it help to leave it out? This seems to make no difference. Any errors (e.g. SMC_SmoothPath.Error/ErrorID) or PLC log messages? No errors or log messages. What if you comment out SMC_SmoothMerge and SMC_LimtiDynamics, is corner smoothing still not working? Indeed. Is bDecode written from a different task (e.g. visu)? Then I would recommend to assign to a local variable (bDecodeLocal := bDecode) and use that for all FBs. Otherwise, FBs might see different values of bDecode in a single cycle, which will cause problems. It is a local variable, written from a state machine inside this program. But there is new information: During some trial and error, I tried skipping "stage 2: merge short linear segments" (SMC_SmoothMerge). And suddenly it rounds the corners, see attached image. Looking a bit closer, I noticed that (with the original program) after a download (cold start?), it in fact did round the corners, but only once. Ever next cycle in which the NC program was executed, the corners where not rounded. Not sure if there is any relation, but SMC_SmoothMerge is also the only FB which has no bAbort input. Perhaps I need to reset it (or any buffers) by other means?
Last updated: 2025-12-18

Sort by relevance or date